Gigastrand NVR Supported IP Cams


This list contains a list of IP cameras that have been tested with the Gigastrand NVR. Most cameras that support MJPEG should work, but occasionally, the camera contains some quirk that makes it incompatible or requires special / additional configuration to make it work.

WorksWorks with ConfigNot Working
CameraAddressUserPassPortNotes
Dlink
DCS‑930L DCS-934L
/video.cgiadminadmin 80Will DHCP on wired connection first. Can configure wireless from there. 
Agasio
M1051
 /videostream.cgi admin  81 
Tenvis IP602w /vjpeg.v?user=operator&pwd=admin
operator
admin
_____
 7777 
Dlink
DCS-935L
/image/jpeg.cgiadmin 80This is the first HD camera verified with GsNVR. This uses the still image URL and will only show a single image when using ALVN.
IP Webcam
App
/video8080This is an Android app that turns a phone into a webcam.
TP-Link
TL-SC3130G
/jpg/image.jpg 
Linksys
WVC54GCA
WVC80N
/img/video.mjpeg
 Sensormatic/ADT
OC810
/img/video.mjpeg
Level One
FCS-0040
WCS-0020
/img/video.mjpeg
Works With Config
CameraAddressUser Pass Port Notes
Foscam
FI9821W
/cgi-bin/CGIStream.cgi?cmd=GetMJStream&usr=operator&pwd=admin 88 / 888Pan/tilt controls should be operated from camera backend. Camera is not Linux-friendly. User and password must be transmitted in the stream URL. Do not use Admin. Use built-in “operator” user and password.
Dahua DH-IPC-DW13A0SN/axis-cgi/mjpg/video.cgiadmin1234580You will need to configure the sub stream for MJPEG and 640×480 before this will work.
Sricam

AP003

/videostream.cgi?user=admin&pwd=admin  81User and password must be transmitted in the stream URL. Do not use Admin. Set the “operator” user and password in setup before installing.

Not Working

Uniden AppCam21 /videostream.cgi?stream=0
admin123456 80

Motion errors: Unrecognized content type
Error reading first header – re-trying
Wireless SSID: Serial#

Password: 12345678

Tenvis IP391w adminadmin80 Would not connect in testing.