Gigastrand NVR Supported IP Cams


This list contains a list of IP cameras that have been tested with the Gigastrand NVR. Most cameras that support MJPEG should work, but occasionally, the camera contains some quirk that makes it incompatible or requires special / additional configuration to make it work.

WorksWorks with ConfigNot Working
Works
CameraAddressUserPassPortNotes
Dlink
DCS‑930L
DCS-934L, 932L
/video.cgiadminadmin 80Will DHCP on wired connection first. Can configure wireless from there. 
Agasio
M1051
 /videostream.cgi admin  81 
Tenvis IP602w /vjpeg.v?user=operator&pwd=admin
operator
admin
_____
 7777Gigastrand configures the port to 80.
Dlink
DCS-935L
/image/jpeg.cgiadmin 80This is the first HD camera verified with GsNVR. This uses the still image URL and will only show a single image when using ALVN.
IP Webcam
App
/video8080This is an Android app that turns a phone into a webcam.
TP-Link
TL-SC3130G
/jpg/image.jpg 
Linksys
WVC54GCA
WVC80N
/img/video.mjpeg
 Sensormatic/ADT
OC810
/img/video.mjpeg
Level One
FCS-0040
WCS-0020
/img/video.mjpeg
Tenvis
IP391W
/vjpeg.vadminadmin80
7777
Gigastrand configures the web port to 80. Factory settings are 7777
Works With Config
CameraAddressUser Pass Port Notes
Amcrest  IP2M-844EMJPEG: /cgi-bin/video.cgi

HD: /cgi-bin/snapshot.cgi

adminadmin801. Set Substream to MJPEG
2. Set Main stream to 720p
Foscam
FI9851P
FI9853EP
FI9804P
Snapshot (HD): /cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=admin&pwd=

MJPEG Init: /cgi-bin/CGIProxy.fcgi?cmd=setSubStreamFormat&format=1&usr=admin&pwd=

MJPEG Stream: /cgi-bin/CGIStream.cgi?cmd=GetMJStream&usr=admin&pwd=

 admin  88
888
See also: Foscam Setup

Use Snapshot URL for HD

Init URL enables MJPEG stream.

Foscam
FI9821W
/cgi-bin/CGIStream.cgi?cmd=GetMJStream&usr=operator&pwd=admin 88
888
Pan/tilt controls should be operated from camera back-end. Camera is not Linux-friendly. User and password must be transmitted in the stream URL. Do not use Admin. Use built-in “operator” user and password.
Dahua DH-IPC-DW13A0SN/axis-cgi/mjpg/video.cgiadmin1234580You will need to configure the sub stream for MJPEG and 640×480 before this will work.
Sricam AP003/videostream.cgi?user=admin&pwd=admin  81User and password must be transmitted in the stream URL. Do not use Admin. Set the “operator” user and password in setup before installing.

Not Working

 CameraAddressUser Pass Port Notes
Uniden AppCam21 /videostream.cgi?stream=0
admin123456 80

Motion errors: Unrecognized content type
Error reading first header – re-trying
Wireless SSID: Serial#

Password: 12345678

Tenvis
IP391W-HD
Use firefox for video: download browser-plugin-vlc from Apper. You may need to disable the Mplayer/gecko plugin so it does not conflict.

Currently testing the following URLs:
/web/cgi-bin/hi3510/snap.cgi?&-getstream&-snapone
/videostream.asf?user=[USERNAME]&pwd=[PASSWORD]
/tmpfs/auto.jpg
/snapshot.jpg?account=[USERNAME]&password=[PASSWORD]

adminadmin80Would not connect in testing. Re-test pending.